FAQs about Wall Packs: Your Guide to Outdoor Lighting with LED Wall Packs

Wall pack lighting is a popular choice for outdoor lighting, providing bright and efficient illumination for a variety of applications. However, with so many options and technical terms, it can be overwhelming to choose the right wall pack for your needs. In this article, we'll answer some frequently asked questions about wall packs to help you make an informed decision.

What is a wall pack?

A wall pack is a type of outdoor lighting fixture that is typically mounted on the side of a building or wall. It is designed to provide bright and efficient lighting for outdoor spaces such as parking lots, walkways, and building exteriors.

Types of wall packs

There are two main types of wall packs: traditional and LED. Traditional wall packs use high-pressure sodium or metal halide bulbs, while LED wall packs use light-emitting diodes (LEDs) as their light source. LED wall packs are becoming increasingly popular due to their energy efficiency and longer lifespan.

What are the benefits of using wall packs?

Wall packs offer several benefits, including:

• Bright and efficient lighting: Wall packs provide bright and even lighting, making them ideal for outdoor spaces that require high levels of illumination.
• Energy efficiency: LED wall packs use significantly less energy than traditional wall packs, resulting in lower energy bills and reduced environmental impact.
• Long lifespan: LED wall packs have a longer lifespan compared to traditional wall packs, reducing the need for frequent replacements and maintenance.
• Durability: Wall packs are designed to withstand harsh outdoor conditions, making them a reliable and long-lasting lighting solution.

How do I choose the right wall pack for my needs?

When choosing a wall pack, there are a few factors to consider:

Light output

The light output of a wall pack is measured in lumens. The higher the lumens, the brighter the light. Consider the size of the area you need to light up and choose a wall pack with a suitable lumen output.

Color temperature

Color temperature refers to the color of the light emitted by the wall pack. It is measured in Kelvin (K) and can range from warm white (2700K-3000K) to cool white (5000K-6500K). Warm white light is more yellow and creates a cozy atmosphere, while cool white light is more blue and provides a brighter and more energizing light. Consider the purpose of the lighting and the desired ambiance when choosing a color temperature.

Wattage

Wattage refers to the amount of power consumed by the wall pack. LED wall packs typically have lower wattage compared to traditional wall packs, making them more energy-efficient.

Mounting options

Wall packs can be mounted in different ways, including surface mount, recessed mount, and pole mount. Consider the location and structure of the area you need to light up to determine the best mounting option for your needs.

How do I install a wall pack?

Wall packs are typically installed by a professional electrician. However, if you have experience with electrical work, you can install a wall pack yourself. Here are the general steps for installing a wall pack:

1. Turn off the power: Before starting any electrical work, make sure to turn off the power to the area where you will be installing the wall pack.
2. Remove the old fixture: If you are replacing an existing wall pack, remove it by unscrewing the mounting screws and disconnecting the wires.
3. Install the mounting bracket: Attach the mounting bracket to the wall using the provided screws.
4. Connect the wires: Connect the wires from the wall pack to the corresponding wires in the junction box. Make sure to match the black wire to the black wire, white wire to the white wire, and green or bare wire to the ground wire.
5. Secure the wall pack: Once the wires are connected, secure the wall pack to the mounting bracket using the provided screws.
6. Turn on the power: After the wall pack is securely installed, turn the power back on and test the light.

How do I maintain my wall pack?

Wall packs require minimal maintenance, but there are a few things you can do to ensure they continue to function properly:

• Regularly clean the fixture and lens to remove any dirt or debris that may accumulate.
• Check for any damaged or burnt out bulbs and replace them as needed.
• Inspect the wiring and connections for any signs of wear or damage.
• If your wall pack has a photocell, make sure it is clean and unobstructed to ensure proper functioning.

Can I use a wall pack indoors?

While wall packs are designed for outdoor use, they can also be used indoors in certain applications. For example, they can be used in large indoor spaces such as warehouses or gymnasiums that require bright and efficient lighting.

How do I know if my wall pack is energy-efficient?

To determine the energy efficiency of a wall pack, look for the Energy Star label. This label indicates that the wall pack meets strict energy efficiency guidelines set by the Environmental Protection Agency (EPA).

What is the lifespan of a wall pack?

The lifespan of a wall pack depends on the type of bulb used. Traditional wall packs typically have a lifespan of around 15,000 hours, while LED wall packs can last up to 50,000 hours.

Are wall packs weather-resistant?

Yes, wall packs are designed to withstand harsh outdoor conditions. They are typically made with durable materials and have an IP (Ingress Protection) rating that indicates their level of protection against dust and water. Look for a wall pack with an IP65 or higher rating for maximum weather resistance.

Conclusion

Wall packs are a popular and efficient lighting solution for outdoor spaces. By considering factors such as light output, color temperature, and mounting options, you can choose the right wall pack for your needs. With proper installation and maintenance, wall packs can provide bright and reliable lighting for years to come.