LED Driver for Recessed Linear Light 2ft 30W 120–277V

What is the input voltage and maximum load for this LED driver?

This SLG Lighting LED driver operates on 120–277V AC input and supports a maximum connected load of 30W, allowing up to three 2-Foot Recessed Linear LED fixtures. It is Class 2 rated for compliance with NEC and UL low-voltage circuit standards.

Which fixtures are compatible with this 2-Foot LED driver?

This driver is compatible specifically with 2-Foot Recessed Linear LED lights. Ensure the total fixture wattage does not exceed 30W, and all wiring remains Class 2 compliant.

How is 0–10V dimming integrated with this driver?

The driver includes 0–10V dimming terminals for connection to low-voltage dimming circuits. Use Class 2 wiring for the dimming leads. The maximum recommended remote distance for reliable 0–10V signal transmission is 500 ft. Multiple fixtures may be dimmed in parallel if the total control load is within the driver’s rating.

What considerations are needed for remote driver mounting?

Drivers may be mounted remotely from fixtures. Verify voltage drop for runs up to 50 ft to maintain consistent lumen output. Maintain separation from high-voltage conductors, ensure proper enclosure clearance for heat dissipation, and check fixture orientation, retention clips, and lens depth to prevent interference.

How many fixtures can I safely connect to a 30W LED driver?

The following configurations are supported, as long as total connected load ≤ 30W:

• One fixture ≤ 30W
• Two fixtures combined ≤ 30W
• Three fixtures combined ≤ 30W

What certifications and warranty does this driver include?

UL Listed, RoHS Compliant, Class 2 rated. Includes a 5-Year warranty. Document installed quantities, dimming wiring, and fixture layout for project documentation and closeout.