LED Wall Pack Light 60/80/100/120W 8280–15720 Lumens 3000K/4000K/5000K IP65 Rated 0–10V Dimming Integrated Emergency Backup 120–277V

What wattage options are available for the LED Wall Pack Light?

The LED Wall Pack Light has four selectable wattage settings: 60W, 80W, 100W, and 120W. This range allows output matching for different mounting heights and perimeter lighting targets without changing the fixture housing.

What lumen outputs correspond to each wattage setting?

The lumen packages by wattage are: 60W provides 8,280 lumens, 80W provides 10,880 lumens, 100W provides 13,400 lumens, and 120W provides 15,720 lumens. These steps support tuning for spacing, uniformity, and fixture count on perimeter runs.

How does 119–138 lm/W efficacy affect energy use and ROI?

An efficacy of 119–138 lm/W reduces watts per delivered lumen versus legacy HID or older LED wall packs. For ROI, compare the selected wattage to the existing system wattage, multiply the watt reduction by annual operating hours and local utility rate, then add any rebate value tied to DLC Premium listing where applicable.

What CCT options are available, and when is each typically specified?

The selectable CCT settings are 3000K, 4000K, and 5000K. 3000K is often selected where glare and neighborhood impact are a concern, 4000K is commonly used for general commercial perimeters, and 5000K is frequently specified where higher contrast is desired for visibility and camera scenes.

Does this fixture support dimming and control integration?

Yes. It supports 0–10V dimming for light-level reduction, scheduling, and compatibility with common exterior lighting control strategies such as time-based setbacks and sensor-driven operation.

What does “integrated emergency backup” provide on this wall pack?

The integrated emergency backup enables the fixture to operate in emergency mode during a normal power loss. The listed emergency duration is 90 minutes, supporting egress-side illumination at exterior doors and other critical points where emergency lighting coverage is required.

What does the IP65 rating indicate for exterior durability?

IP65 indicates the enclosure is dust-tight and protected against water jets. This is appropriate for exterior wall-mounted installations exposed to wind-driven rain, airborne debris, and routine washdown conditions.

What is the minimum operating temperature, and why does it matter?

The minimum operating temperature is -22°F. Cold-start capability helps maintain reliable operation in winter conditions where driver performance and battery charging behavior are part of the overall reliability plan.

What certifications does this LED Wall Pack Light carry?

This model is UL Listed and DLC Premium Listed. UL listing confirms luminaire safety compliance, and DLC Premium listing is commonly used to support utility rebate documentation where DLC qualification is required.

What are the fixture dimensions?

The housing measures 14.2" W × 9.3" H × 7.3" D. For installation planning, confirm junction box alignment, conduit entry, and mounting height so the distribution meets the site plan without excessive spill or hotspotting.

What warranty coverage is included?

The LED Wall Pack Light includes a 5-year limited warranty. For maintenance records, document the selected wattage and CCT at commissioning and note the emergency feature for future service troubleshooting.