LED Full Cutoff Wall Pack Light 30/60/90/120W 5190–19320 Lumens 3000K/4000K/5000K IP65 Rated 0–10V Dimming 120–277V

What wattage options are available for the LED Full Cutoff Wall Pack Light?

The LED Full Cutoff Wall Pack Light provides four selectable wattage settings: 30W, 60W, 90W, and 120W. This range supports output matching for different mounting heights, setback distances, and target illuminance levels along building perimeters.

What lumen outputs correspond to each wattage setting?

The lumen packages by wattage are: 30W delivers 5,190 lumens, 60W delivers 10,260 lumens, 90W delivers 15,030 lumens, and 120W delivers 19,320 lumens. These steps allow spacing and light levels to be tuned without changing the fixture footprint.

How does 144–173 lm/W efficacy impact operating cost and ROI?

An efficacy of 144–173 lm/W reduces input watts per delivered lumen, which improves payback in retrofit work where legacy HID wall packs draw substantially higher system wattage. For ROI modeling, compare the selected wattage to the existing fixture’s measured or nameplate system watts, multiply the reduction by annual hours and local $/kWh, then add any DLC-based incentive value where rebates are offered for DLC Premium-listed fixtures.

What CCT options are available, and how are they typically specified for exterior applications?

The selectable CCT settings are 3000K, 4000K, and 5000K. 3000K is commonly specified where warmer appearance and reduced perceived glare are desired, 4000K for general-purpose commercial exterior lighting, and 5000K where higher contrast is preferred for perimeter visibility and camera performance.

What does “full cutoff” mean for light control and site compliance?

A full cutoff wall pack is designed to limit uplight and direct light downward toward the target area. This supports tighter control at property lines and reduces spill toward windows or adjacent parcels, which is often a requirement in exterior lighting plans focused on glare control and dark-sky-aligned layouts.

Is the LED Full Cutoff Wall Pack Light dimmable?

Yes. The fixture supports 0–10V dimming, enabling light-level reduction for scheduled curfews, adaptive control strategies, or integration with compatible commercial lighting controls.

What environmental protection does the IP65 rating provide?

An IP65 rating indicates the enclosure is dust-tight and protected against water jets. This is commonly specified for exterior wall-mounted luminaires exposed to wind-driven rain and airborne debris, supporting reliability in commercial perimeter installations.

What is the minimum operating temperature, and why does it matter?

The minimum operating temperature is -22°F. Cold-temperature capability is relevant for exterior sites where drivers and optics must start and operate reliably during winter conditions without reduced control performance or startup issues.

What certifications does this wall pack have?

This model is UL Listed and DLC Premium Listed. UL listing addresses safety requirements for the luminaire, and DLC Premium listing is commonly used to support qualification for utility rebate programs where DLC is a requirement.

What are the fixture dimensions, and what should be confirmed during layout and installation?

The housing measures 13.08" W × 9.259" H × 7.1917" D. Confirm mounting height, wall condition, junction box compatibility, conduit entry planning, and aiming/orientation so the cutoff optics align with the intended distribution.

What warranty coverage is provided?

The LED Full Cutoff Wall Pack Light includes a 5-year limited warranty. For maintenance planning, document the selected wattage/CCT settings at commissioning to simplify troubleshooting and like-for-like replacement.