Garage Canopy Light 39 Watt 5200 Lumens 80+ CRI 0-10V Dimmable 160 Degree Beam Angle IP54 Rated Polycarbonate Fresnel Lens 120-277V

Where is a 5,200-lumen canopy luminaire typically specified?

This output level is commonly specified for covered pedestrian canopies, building entries, drive lanes, smaller parking deck bays, and covered walkways where the goal is consistent horizontal illumination without the higher lumen packages used for tall ceilings or wide drive aisles.

What does 5,200 lumens at 39W translate to in efficacy?

The fixture produces 5,200 lumens at 39W, which calculates to 133.3 lm/W. Maintained results depend on mounting height, spacing, and surface reflectances under the canopy.

How does a 160° beam affect spacing under a canopy?

A 160° distribution spreads light broadly across the pavement plane, which can reduce dark bands between fixtures in typical canopy layouts. For perimeter edges and transitions to open areas, confirm uniformity using the photometric file and the project’s minimum-to-average criteria.

What does IP54 indicate, and how does that align with wet-location use?

IP54 indicates limited dust ingress protection and protection against water spray from any direction. The wet-location rating addresses exposure to weather under open-sided canopies where wind-driven rain and moisture can be present.

What does a polycarbonate Fresnel lens contribute in a garage or canopy environment?

A polycarbonate Fresnel lens supports optical control while using an impact-resistant material. In canopy applications, it helps distribute light across the intended area and reduces direct view of the LED sources at typical approach angles.

How should 4000K versus 5000K be selected for exterior circulation lighting?

4000K is commonly specified where a neutral white appearance is preferred around building perimeters and mixed-use sites. 5000K is typically selected where higher contrast supports camera performance, signage visibility, and identification tasks in parking and drive-lane conditions.

What does CRI 83 support for visibility and identification?

A CRI of 83 supports accurate recognition of colors and contrast for wayfinding, pavement markings, and general identification tasks. If a project has color-critical requirements, verify any additional color metrics provided in manufacturer documentation.

What does 0–10V dimming support for garage and canopy controls?

0–10V dimming supports integration with occupancy sensors and scheduling controls, including bi-level operation during low-traffic hours. It also supports commissioning trim so measured light levels can be aligned to the project target after installation.

How does the 120–277V input range support commercial electrical planning?

The 120–277V driver supports common branch circuit voltages, including 277V lighting circuits used in many commercial facilities. This can simplify specifying the same fixture across sites with different electrical services.

What does DLC Premium listing support for documentation and rebates?

DLC Premium listing is commonly referenced for utility rebate qualification and for submittals that require third-party verification of performance. Confirm eligibility by utility program, since rebate requirements vary by territory.

What does a minimum operating temperature of -4°F indicate for winter operation?

A minimum operating temperature of -4°F indicates the driver and LED system are rated for cold-weather starts and operation down to that ambient temperature. For colder climates or wind-exposed installations, confirm site conditions and any derating guidance in the manufacturer documentation.

What should be tracked for maintenance planning based on rated life and warranty?

The fixture is rated for 50,000 hours and includes a 5-year limited warranty. For maintenance planning, record fixture locations, control zoning, and the selected CCT by area so replacements match appearance and dimming behavior.