Lotus Round Regressed Gimbal LED Lighting Fixtures

Lotus Round Regressed Gimbal LED Lighting Fixtures

Lotus round regressed gimbal LED lighting fixtures feature a class 2 isolated external driver that is factory installed in a junction box for easy installation.

Cut hole in ceiling and snap fixture in opening with attached spring clips. Ceiling Clearance Required: 1 1/2″ with driver remotely installed, 5″ if driver is next to the fixture.

  • Available in 2-inch, 3-inch, 4-inch and 6-inch Sizes
  • Choose from Black and White Finishes
  • Default Driver: 120V input Triac Dimmable with most CL dimmers
  • Optional Driver: 120V-347V input 0-10V Dimmable
  • Energy Used: 5.5W
  • Power factor: > 0.95
  • Beam Angle: 24° Beam with 20° tilt and 360° rotation
  • Light color options: Warm White 2700K, Soft White 3000K, Bright White 3500K, Neutral White 4000K, Daylight White 5000K
  • Light output: Warm White 450 lm, Soft White 490 lm, Bright White 500 lm, Neutral White 530 lm and Daylight White 550
  • CRI 90+
  • Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
  • Compliance: cULus approved, certified to CSA STD. C22.2 No. 250.0
  • Rated: Type IC (Direct Contact with Insulation), Energy Star, T24, Air-Tight
  • ID 2 1/2″, OD 3″; Thickness 1 3/4″
  • Cut out: 2 1/2″ to 2 3/4″
  • Junction Box Dimensions (with driver inside): 2 3/4″ x 2″ x 1 3/4″
  • Suitable for wet locations and soffit installations.

Check out our full selection of Lotus Round Regressed Gimbal LED Lights

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.