Lotus Regressed LED Lighting Fixtures

Lotus Regressed LED Lighting Fixtures

Lotus regressed LED lighting fixtures feature a commercial grade quality with an architectural design. The come with a pre-installed external driver in a connection box.

Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips. 2″ Above Ceiling Clearance Required. Quick connectors Included.

  • Choose from Round and Square Styles
  • Available in Black and White Finishes
  • Default Driver Input Voltage: 120V AC (Dimmable)
  • Optional Driver Input Voltage: 277V-347V AC (Not Dimmable)
  • Power factor: > 0.99
  • Energy Used: 14.5W
  • Halogen equivalent: 90W
  • Beam Angle: 92°
  • Light colour options: Warm White 2700K, Soft White 3000K and Neutral White 4000K
  • Light output: Warm White 950 lm, Soft White 1000 lm, and Neutral White 1020 lm
  • CRI > 90 for True Colour Rendering
  • Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
  • Compliance: cULus Listed
  • Rated: Type IC (Direct Contact with Insulation), Energy Star, Open Plenum, Wet Location, Air-Tight, T24
  • OD 5″ (125 mm); ID 4″ (100 mm); Thickness 2″ (51 mm)
  • Cut out: 4″ to 4 1/4″
  • Suitable for Insulated Ceilings & Open Plenum locations

Check out our full selection of Lotus Regressed LED Lighting Fixtures

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.