Lotus 4" Deep Regressed LED Lights

Lotus 4" Deep Regressed LED Lights

Overview of Lotus 4" Deep Regressed LED Lights

Lotus 4″ deep regressed LED lights feature an elegant design that eliminates unwanted glare. With a conveniently placed pre-installed driver inside a connection box and Romex connectors, helps to speed up installation.

Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips. Ceiling Clearance Required: 3 1/2″

  • Default Driver Input Voltage: 120V AC TRIAC Dimmable
  • Optional Driver Input Voltage: 120V-347V AC 0-10V Dimmable
  • Power factor: 0.98
  • Energy Used: 15W or 18W
  • Halogen equivalent: 110W / 150W
  • Beam Angle: 30°
  • Light colour options: Warm White 2700K, Soft White 3000K, Bright White 3500K, Neutral White 4000K, Daylight White 5000K and Dim to Warm 3000K – 2000K
  • Light output 15W model: Warm White 1100 lm, Soft White 1200 lm, Bright White 1250 lm, Neutral White 1300 lm, Daylight White 1400 lm, Dim to Warm 900 lm
  • Light output 18W model: Warm White 1500 lm, Soft White 1550 lm, Bright White 1600 lm, Neutral White 1650 lm, Daylight White 1700 lm, Dim to Warm 1150 lm
  • CRI: 90+
  • Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
  • Compliance: cULus, Energy Star (except DTW), T24
  • ID 4″; OD 4 7/8″; Thickness 3 1/2″
  • Cut out: 4″
  • Junction Box Dimensions (with driver inside): 3 3/4″ x 3 3/8″ x 1 1/2″
  • Suitable for insulated ceilings, open plenum, and wet locations.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.