Linear high bay lights shown in massive industrial warehouse that is empty

Maintenance Guide for Linear High Bay Lights

Linear high bay lights are commonly used in warehouses, factories, and other large commercial spaces due to their high energy efficiency and bright illumination. However, like any other lighting system, they require regular maintenance to ensure optimal performance and longevity. In this blog post, we will provide a comprehensive maintenance guide for linear high bay lights, covering everything from cleaning and inspection to troubleshooting and replacement. By following these guidelines, you can maximize the lifespan of your linear high bay lights and minimize the risk of unexpected failures.

Cleaning and Inspection

Cleaning the Light Fixtures

  • Turn off the power supply before cleaning the fixtures.
  • Use a soft cloth or sponge dampened with a mild detergent solution to wipe the surface of the fixtures.
  • Avoid using abrasive cleaners or solvents that may damage the finish.
  • Dry the fixtures thoroughly before turning the power back on.

Inspecting for Damage or Wear

  • Regularly inspect the fixtures for any signs of damage, such as cracks or dents.
  • Check the wiring connections for any loose or exposed wires.
  • Look for signs of wear on the light bulbs, such as discoloration or flickering.
  • Replace any damaged or worn components immediately to prevent further issues.

Troubleshooting Common Problems

Dim or Flickering Lights

  • Check the power supply to ensure it is stable and providing the correct voltage.
  • Inspect the light bulbs for loose connections or signs of wear.
  • Replace any faulty or damaged light bulbs with new ones.
  • If the issue persists, consult a professional electrician to inspect the wiring and ballast.


  • Ensure that the fixtures are properly ventilated and not obstructed by any objects.
  • Check the ambient temperature of the space and make sure it is within the recommended range for the fixtures.
  • Clean any dust or debris that may have accumulated on the fixtures, as it can impede heat dissipation.
  • If the fixtures continue to overheat, consider installing additional ventilation or cooling systems.

Replacing Components

Light Bulbs

  • Turn off the power supply and allow the bulbs to cool down before replacing them.
  • Carefully remove the old bulbs by twisting them counterclockwise.
  • Insert the new bulbs by twisting them clockwise until they are securely in place.
  • Turn on the power supply and test the new bulbs to ensure they are functioning properly.


  • Turn off the power supply and disconnect the wiring from the old ballast.
  • Remove the old ballast from the fixture by unscrewing or unclipping it.
  • Install the new ballast by following the manufacturer's instructions.
  • Reconnect the wiring and turn on the power supply to test the new ballast.


Regular maintenance is essential for ensuring the optimal performance and longevity of linear high bay lights. By following the cleaning and inspection guidelines, troubleshooting common problems, and knowing how to replace components, you can keep your lighting system in top condition. Remember to always prioritize safety and consult a professional if you are unsure about any maintenance tasks. With proper care, your linear high bay lights will continue to provide efficient and reliable illumination for years to come.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.