Electrician shown installing LED flush mount light

How to Properly Install LED Flush Mount Lights

Installing LED flush mount lights can be a great way to update the lighting in your home or office. Not only do these lights provide a modern and sleek look, but they also offer energy efficiency and long-lasting performance. However, proper installation is crucial to ensure that the lights function correctly and safely. In this blog post, we will guide you through the step-by-step process of installing LED flush mount lights, from preparing the area to connecting the wiring. Whether you are a DIY enthusiast or a beginner, this guide will help you achieve a professional and hassle-free installation.

Preparing for Installation

Gather the necessary tools and materials

  • LED flush mount lights
  • Screwdriver
  • Wire stripper
  • Wire nuts
  • Electrical tape
  • Ladder or step stool

Turn off the power

  • Locate the circuit breaker that controls the area where you will be installing the lights
  • Switch off the circuit breaker to cut off the power supply

Removing the Old Fixture

Remove the old light fixture

  • Unscrew and remove the screws or nuts that hold the old fixture in place
  • Carefully detach the fixture from the ceiling or wall
  • Disconnect the wiring from the old fixture

Inspect the wiring and junction box

  • Check the condition of the wiring for any signs of damage or wear
  • Inspect the junction box to ensure it is secure and in good condition
  • Make any necessary repairs or replacements before proceeding

Installing the LED Flush Mount Lights

Mount the fixture bracket

  • Attach the fixture bracket to the junction box using the provided screws
  • Ensure that the bracket is securely fastened and level

Connect the wiring

  • Strip the insulation from the ends of the wires
  • Connect the black wire from the fixture to the black wire from the junction box, and secure them together with a wire nut
  • Repeat the process for the white wires and the ground wires

Attach the fixture

  • Carefully align the fixture with the bracket
  • Secure the fixture to the bracket using the provided screws

Testing and Finishing Touches

Restore the power

  • Switch on the circuit breaker to restore power to the area

Test the lights

  • Turn on the switch to test the functionality of the LED flush mount lights
  • Ensure that all lights are working properly

Secure and cover the wiring

  • Use electrical tape to secure the wire nuts and prevent them from coming loose
  • Tuck the wiring neatly into the junction box
  • Attach the cover plate to the fixture to conceal the wiring and provide a finished look


By following these step-by-step instructions, you can successfully install LED flush mount lights in your home or office. Remember to always prioritize safety by turning off the power before starting the installation process. With the right tools and materials, as well as careful attention to detail, you can achieve a professional and aesthetically pleasing lighting upgrade. Enjoy the benefits of energy-efficient and long-lasting LED lighting in your space.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.