Bathroom vanity light shown illuminating vanity in master bathroom with tub and large windows

How to Install Bathroom Vanity Lights

Installing bathroom vanity lights can be a great way to update the look and functionality of your bathroom. Whether you're replacing old lights or adding new ones, this blog post will guide you through the process of installing bathroom vanity lights. From choosing the right lights to wiring and mounting them, we'll cover all the steps to ensure a successful installation.

Choosing the Right Lights

Consider the Style and Design

  • Determine the overall style and design of your bathroom
  • Choose lights that complement the existing decor
  • Consider the size and shape of the vanity lights

Decide on the Type of Lights

  • Decide between wall sconces, vanity bars, or pendant lights
  • Consider the amount of light needed for the space
  • Determine if you want dimmable lights or not

Gathering the Necessary Tools and Materials


  • Screwdriver
  • Wire stripper
  • Wire connectors
  • Voltage tester
  • Drill
  • Level


  • Vanity lights
  • Mounting brackets
  • Electrical tape
  • Wire nuts
  • Screws
  • Electrical wire

Preparing for Installation

Turn Off the Power

  • Locate the circuit breaker for the bathroom
  • Turn off the power to the bathroom lights

Remove the Old Lights

  • Unscrew the old light fixtures from the wall
  • Disconnect the wiring from the old lights
  • Remove any mounting brackets or hardware

Wiring the Vanity Lights

Check the Wiring

  • Use a voltage tester to ensure the power is off
  • Check the existing wiring for any damage or issues

Connect the Wires

  • Strip the ends of the electrical wires
  • Connect the black wires together using wire nuts
  • Connect the white wires together using wire nuts
  • Connect the ground wires together using wire nuts

Mounting the Vanity Lights

Attach the Mounting Brackets

  • Position the mounting brackets on the wall
  • Use a level to ensure they are straight
  • Mark the screw holes and drill pilot holes
  • Attach the mounting brackets to the wall using screws

Install the Vanity Lights

  • Attach the vanity lights to the mounting brackets
  • Secure them in place using screws or other provided hardware
  • Double-check that the lights are level and properly aligned

Testing and Finishing Touches

Turn on the Power

  • Turn the power back on at the circuit breaker
  • Test the vanity lights to ensure they are working properly

Adjust and Secure

  • Adjust the position of the lights if needed
  • Tighten any loose screws or connections


By following these step-by-step instructions, you can easily install bathroom vanity lights and enhance the overall look and functionality of your bathroom. Remember to always prioritize safety and consult a professional if you are unsure about any aspect of the installation process. Enjoy your newly installed vanity lights and the improved ambiance they bring to your bathroom space.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.