Round 4″ fixtures with integral LEDs. Isolated external driver factory installed inside junction box. One driver for every fixture required.
Cut Hole In Ceiling And Snap Fixture In Opening With Attached Spring Clips. 2″ Above Ceiling Clearance Required For Driver.
- Default Driver Input Voltage: 120V AC (Dimmable)
- Optional Driver Input Voltage: 277V-347V AC (Not Dimmable)
- 24V DC model Input Voltage: 20-28V DC (Not Dimmable)
- Power factor: > 0.98
- Energy Used: 13.5 W
- Halogen equivalent: 75W
- Beam Angle: 110°
- Light color options: Warm White 2700K, Soft White 3000K, Neutral White 4000K and Daylight White 5000K
- Dim to Warm options: 3500K to 2000K and 2800K to 2000K
- Light output: Warm White 750 lumens, Soft White 760 lumens, Neutral White 800 lumens and Daylight White 850 lumens
- CRI greater than 90 for True Color Rendering
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus Listed
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Air-Tight, T24
- ID 4 1/8″; OD 5 1/4″; Thickness 1/2″
- Cut out: 4 1/4″ to 4 1/2″
- Junction Box Dimensions (with driver inside): 3 1/2″ x 3 1/2″ x 1 1/2″
- Suitable for Wet and Damp locations including showers and soffits.