Square 4″ fixtures with integral LEDs. Round back side for easy installation. Isolated external driver factory installed inside junction box. One driver for every fixture required.
Cut hole in ceiling and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver 2″.
- Default Driver Input Voltage: 120V AC 60 Hz (Dimmable)
- Optional Driver Input Voltage: 277V-347V AC 60 Hz (Not Dimmable)
- Power factor: greater than 0.95
- Energy Used: 13.5W
- Halogen equivalent: 90W
- Beam Angle: 100°
- Light color options: Warm White 2700K, Soft White 3000K, Neutral White 4000K
- Light output: Warm 800 lumens, Soft 850, Neutral 950 lumens
- CRI 80
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star, Wet Location, Air-Tight
- OD 4 3/4″ square; ID 4 1/8″; Thickness 1/2″
- Cut out: 4 1/8″ to 4 1/4″
- Junction Box Dimensions (with driver inside): 3 5/16″ x 3 5/16″ x 1 1/8″
- Suitable for Wet locations.