Round 4″ fixtures with integral LEDs. Class 2 Isolated external driver factory installed inside junction box. One driver for every fixture required.
Cut out hole in ceiling (4 1/4″ to 4 1/2″) and snap fixture in opening with attached spring clips. Space in ceiling needed for the driver to fit through the hole – 2″.
- Driver Input Voltage: 120V AC (Dimmable)
- Optional Driver Input Voltage: 277 – 347 V AC (Not Dimmable)
- Power factor: > 0.98
- Energy Used: 11W
- Halogen equivalent: 65W
- Beam Angle: 110°
- Light colour options: Warm White 3000K, Neutral White 4100K, Dim to Warm 3000K to 2000K
- Light output: Warm White 700 lm, Neutral White 730 lm, Dim to Warm 700 lm
- CRI: > 80
- Ambient Operating Temperature: -40°F (-40°C) to +104°F (+40°C)
- Compliance: cULus Listed, certified to CSA STD. C22.2 No. 250.0
- Rated: Type IC (Direct Contact with Insulation), Energy Star (30K and 41K only), Air-Tight
- ID 4″; OD 4 7/8″; Thickness 1/2″
- Cut out: 4″ to 4 1/4″
- Junction Box Dimensions (with driver inside): 3 3/4″ x 3 3/8″ x 1 1/2″
- Suitable for damp locations and soffit installations.